HANGKAI 2 Stroke 18 HP Outboard Motor Boat Engine Water Cooled System Long Shaft

<p>Details<br>Three-blade Propeller: The three-blades propeller with a streamlined design provides you with greater power.<br>Silencer Cover: The silencer cover can absorb the noise generated by the fan through the internal sound-absorbing material, thus providing a quieter working environment.<br>Anti-swirl Plate: The anti-swirl plate can effectively reduce the turbulence of the waves and avoid water-wetting clothes.<br>Application<br>This kind of outboard motor is suitable for small ships of different materials (the length of the ship is greater than 3 meters, the net weight of the ship is greater than 60kg, the load of the ship is less than 1000kg), such as rubber boats, iron boats, plastic boats, glass fiber boats, wooden boats, etc. Widely used in fishery, aquaculture, outdoor exploration and other fields.<br>Gear Oil Filling Method<br>There is a screw on the gearbox, unscrew the screw to add gear oil. Gear oil is not filled before each machine leaves the factory, so please fill gear oil when using for the first time. After that, add according to personal use, and check every ten hours.<br>Specification<br>Material: Aluminum Alloy<br>Color: Black<br>Model: 18HP Horsepower Long Axis<br>Displacement: 246CC<br>Gear Ratio: 2.08 (27:13)<br>Number of Cylinders: 2<br>Speed: 4500-5500RPM<br>Gear: F-N-R<br>Refueling Method: 92 Unleaded Gasoline is Recommended<br>Oil Tank Capacity: 24L/6.34gal<br>Load-bearing Capacity: 500-1000kg/1102-2204lbs<br>Ignition System: CDI<br>Cooling System: Water Cooling<br>Control System: Tiller Control<br>Start System: Manual Start<br>Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter)<br>Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in<br>Cylinder Diameter * Stroke: 56mm/2.2in*50mm/2in<br>Recommended Engine Oil: 2 Stroke Engine Oil<br>Mixing Ratio: Fuel: Oil = 50:1<br>Trim and Tilt System: Manual Tilt<br>Net Weight: 41kg/90.38lbs<br>Gross Weight: 53kg/116.84lbs<br>Package Size: 133*71*38.5cm/52.4*28*15.2in<br>Product Size: 87.3*33.2*117cm(34.4*13.1*46.06inch)<br>Package Included<br>1x Outboard Motor<br>1x Flameout Rope<br>1x Oil Pipe<br>1x Sealing Ring<br>1x Paper Pad<br>1x Spark Plug<br>1x Start Rope<br>1x Water Pump Impeller<br>1x Cotter Pin<br>1x Fuel Tank<br>1x English Manual<br>Other Tools<br>Notes<br>1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.<br>2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.<br>3. After the running-in period, the volume ratio of gasoline and oil is 50:1.<br>4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.<br>5. The outboard motor must be started in water, do not start the engine on shore.<br>6. Loosen the vent screw on the fuel tank cover counterclockwise when starting.<br>7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt.<br>8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator.<br>9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months.<br>10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.</p>